OneDux Box
OneDux Box is OpenWrt firmware with the OneDux agent preinstalled. After you bind a Box to your account, it shows up in the console. It gets a DDNS name, can join your Fabric network, and can install servers on its LAN (Node Maker).
Certified devices
Section titled “Certified devices”| Device | Type | Use it when |
|---|---|---|
| GL.iNet Flint 2 (GL-MT6000) | Wi-Fi 6 router, 2× 2.5G + 4× 1G | You want one box for Wi-Fi and routing |
| G30W-1264NP-4L5G | Fanless x86 mini PC, N100/N150, 4× 2.5G Intel i226 | You want a wired gateway with an internal disk; add your own access points for Wi-Fi |
Other OpenWrt hardware may work but isn’t tested or supported.
Getting started
Section titled “Getting started”- Download the firmware for your device: console.onedux.com/box (sign-in required).
- Check the download. Compare its SHA-256 with the one shown on the download page (how).
- Install it by following your device’s guide: MT6000 or G30W.
- Bind it to your account: Bind and manage.
- Verify the firmware
- Bind and manage: bind, update, set the city, unbind
- Troubleshooting